AB IMO PECTORE.

STRAIGHT FROM THE HEART.

MILAN RED is pure. It does not rely on extravagant designs. Performance and the connection to its driver makes the MILAN RED the exceptional vehicle it is.

MILVUS EX MACCHINA

MILAN IN THE MACHINE.

Engineered in Austria, powered exclusively by a V8 quad-turbo combustion engine. MILAN RED allows an elite group of hand-picked owners to enjoy the full range of its extraordinary performance on the street.

Performance: 1.325 hp at 7.000 rpm
Torque: 1.400 Nm at 6.000 rpm
Power unit: V8 Quad Turbo Motor
Displacement: 6.2 liters
Layout: mid-engine longitudinal

Drivetrain: Rear-wheel drive
Transmission: 7-Gear Dual clutch transmission
Selectable driving modes: Glide, Hunt, Attack

Dimensions:
Width: 2156mm
Length: 4741mm
Height: 1197mm
Wheelbase: 2750mm

Top Speed: >400 kph
Acceleration: 0-100 2.47 sec / 0-200 5.46 sec / 0-300 9.98 sec

Max. lateral acceleration: 2.6 G
Aerodynamic efficiency: Cl/Cd >1.7

Frame: Carbon fiber Monocoque with CFRP crash structure
Rear frame: Engine- and gear box carrying CFRP structure
Bodywork: Carbon

MILAN High Downforce Diffusor
Front Wing: integrated splitter and brake cooling ducts
Rear Wing: Dynamic rear wing position with airbrake function

Front: 20″ Forged aluminum wheels / 265/35 R20
Rear: 21″ Forged aluminum wheels / 325/30 R21

Front: Brembo “CCM-R” Carbon Ceramic 390mm / 6 piston calipers
Rear: Brembo “CCM-R” Carbon Ceramic 380mm / 4 piston calipers

Front: CFRP double wishbone geometry with SLM titanium wheel hubs (adjustable camber and toe); pull rod and rocker actuated 3 spring-damper system with adjustable anti-roll bar
Rear: CFRP double wishbone geometry with SLM titanium wheel hubs (adjustable camber and toe); pull rod and rocker actuated 3 spring-damper system with adjustable anti-roll bar

Ground clearance normal: 90mm
Ground clearance lifted: 135mm

Additional dynamic vehicle height control to optimize downforce over the entire speed range.

NOLLE IN CAUSA EST, NON POSSE PRAETENDITUR.

NOT WANTING TO IS THE REASON, NOT BEING ABLE TO IS THE EXCUSE

Performance and safety need not be a compromise. From the crash box, the suspension system, passenger cell, as well as the rear sub frame bearing engine, gearbox and a CFRP crash structure, carbon fiber is the only material providing the properties needed to manufacture the Milan RED.

The Austrian Formula 1 specialist, PEAK Technology, employs an inherently timeconsuming and costly production process and paves the way for breath-taking results, regarding driving performance, quality and driver safety.

VESTIMENTUM NON FACIT MILVUM.

FEATHERS DO NOT MAKE THE BIRD OF PREY, HIS ACTIONS DO.

TITANIUM

SLM WHEEL CARRIERS

Selective Laser Melting (SLM) is a technique is similar to 3D printing, which enables the production of highly complex, bionic structures. This manufacturing method enables upright solutions tailored to the high demands of the Milan RED, exceeding today’s technical standards in lightweight design and providing an outstanding and unique product.


CCM-R

BRAKE TECHNOLOGY

Exceptional braking performance is required to deliver the right stopping power when it’s needed. First-class braking performance is not sufficient for the Milan Red. Both high thermal stability and everyday suitability of the brake system must be achieved without compromise. CCM-R brake technology from Brembo meets these expectations by outperforming all current brake system technologies.


CARBON

WISHBONES

For the first time in a road approved vehicle – aerodynamically optimized wishbones made of carbon celebrate their debut in the Milan Red. However, the obvious advantage they
offer for completing the lightweight concept is too superficial. Their main benefit is the optimization of vehicle dynamics by providing unprecedented stiffness and minimizing unsprung mass. Technology only found in Formula 1 finding its way onto the road.


THE

HOT V

The design of the V8 Quad Turbo engine is consistent with the aerodynamic concept. The „Hot-V” hast its roots in motorsport and significantly contributes to the external appearance of the rear end. Cold air flows from the top, cools the high temperature parts between the cylinders and exits through the back of the car. Hence the name „Hot V”.


MILAN

HIGH DOWNFORCE DIFFUSOR

The “Milan High Downforce Diffuser” is a newly developed concept to maximize aerodynamic efficiency of the underbody. Beginning directly behind the driver’s seat, the design draws as much aerodynamic potential as possible from the vehicle floor. The entire suspension and engine structure follow this concept and are part of this new development to guarantee peak performance in every driving situation.


SEMPER FIDELIS.

FOREVER LOYAL.

Whether intended as an investment or a source of pure driving pleasure – as a technical masterpiece, the Milan Red is maintained exclusively by Milan’s engineers. For the first five years of its life, MILAN’s experts take care of service and maintenance as only the most trusted specialists are responsible for the well-being of each individual Milan – this ensures both flawless function and appropriate first-class support. Thanks to advanced telemetry, Milan’s Flying Doctors can send a remote diagnosis request to the vehicle to check the current status and select the right engineer. It also acts as a direct link between the driver and the technical department to ensure untroubled enjoyment and full performance at anytime, anywhere.

The world of racing depends on the highest level of perfection. This can only be achieved by evaluating and optimizing dynamic parameters.

A similarly comprehensive telemetry system provides valuable information both live and retrospectively to increase performance constantly.

The Milan Red doesn’t only aim to guarantee safety. There can be no compromises in this area and the employed technologies reflect this strive for perfection.
The sophisticated front and rear carbon crash boxes are developed by specialist engineers and utilize state-of-the-art technology – hence providing maximum protection for the passenger cell, which is designed as a carbon monocoque and shows superb roll-over stability.
The safety package is completed by driver and front passenger airbags.

SUUM CUIQUE.

TO EACH THEIR OWN.

Every Milan Red has its own personality. True to its natural example, none of these 99 vehicles are the same. In addition to the customization options, the full personality of every Milan Red unfolds together with it’s owner to make it unique.